Extend the service life of electric forklifts

Do electric forklift daily care can prolong the life of the truck. Reduce procurement costs and depreciation expense forklift. Many companies are aware of this truth, but in practical nursing electric forklifts, and do not know how to do it, here Hebei earthworm telehandlers introduce you to electric battery powered forklift daily nursing work:
1, engine oil, hydraulic oil, electrolyte tests: first pull out the dipstick, wipe feet after insertion and then pull out the head to check the oil level is between the two tick marks. The working oil tank level should be between the two tick marks; too little oil, the pipeline will be mixed in the air, too much will overflow from the cover. Battery electrolyte also want lies between the upper and lower tick, add distilled water shortage will have the top line.
2. Check tire pressure: shortage should be added to the specified value, confirm no leakage. Check the tire tread and the side without damage, the rim is deformed.
3, brake fluid, water, check: Check the brake fluid is within the scale range, and check whether mixed with air in the brake lines. When adding brake fluid, to prevent dust and water mixed. When water is added to the tank, use clean tap water, if used antifreeze, should bear the same antifreeze. When the water temperature is higher than 70 ℃, do not open the radiator cap when you open the lid, a piece of thin cloth mat, do not wear gloves tighten radiator cap.
4, cleaning the truck dirt, mud and dirt Egypt, key parts are: fork frame and door frame slide, generator and starter, battery electrodes fork columns, tanks, air filter.
5, the brake pedal, the inching pedal, clutch pedal, hand brake check: Each pedal is depressed, check for abnormal slow or jammed. Force the hand brake lever should be less than 300N, confirmed that the hand brake is safe and reliable.
6, check for leaks, the focus is: all fittings, diesel tank, sump, pump the brake, lift cylinders, tilt cylinders, tanks, pumps, engine oil pan, torque converter, transmission, drive axle, main reducer , hydraulic steering gear, steering cylinder.
7, belts, horn, lights, instruments and other checks: Check the electric forklift trucks tension is compliance, not adjusted for cracks or broken margin shall be replaced; horn, lights, instruments should be properly effective.
8. Check steering reliability, flexibility.
9, put to the oil filter sediment.
10, check all parts of the fastening case, the focus is: Fork supporting, lifting chain tensioning screw, wheel bolts, wheel fixing pins, brakes, steering screws.