Liquefied petroleum gas forklift check

Liquefied petroleum gas lift gas check


When inflated, gas powered forklift ,the aerated holster on the bottle filling valve on the screw.

The bottle on the "80% level hole" by hand pulling the gun wrench unscrew, inflatable, began filling.

Cylinder liquid level in up to 80%, there will be a white mist rising from the "80% level hole", then immediately stop filling, 2.5ton lpg forklift to 80% level hole screwed tight shut off, remove the air gun at a little leakage, belongs to the normal.

Liquefied petroleum gas forklift filling step

Before changing the bottle, the export will be at the manual switch is tightened, let the engine at idle speed continues to rotate, gas powered forklift , directly within the fuel burn out so far.

In cylinder overflow valve outlet is a quick change joint, the undo separation (due to where male and female connectors of the interior have a reverse stopping device. Therefore, both ends of no air leakage, little leakage belongs to normal phenomenon), the female connector fixed on the bracket of the male joint, to prevent the liquefied petroleum gas hose freely unscrewed the accidents caused.

Carefully remove the cylinder, 2.5ton lpg forklift ,place the cylinder in an upright position, and then connect the gas valve with the pneumatic valve (with the car standby).

No matter what aerated mode you choose,pay attention!

Around is strictly prohibited fireworks or close to the heat source, lpg forklift truck , fire and low-lying place (in order to avoid accumulation of liquefied gas lingers).

Careful treatment of cylinder, forklift truck unloading, not crash, a throw or on the ground rolling. When filling must be shall be carried out by a trained and experienced personnel. Filling in the process of filling must monitor the entire process, shall not leave the scene.

Put the bottle before, 2.5ton lpg forklift will exit the manual switch tightened, let the engine continues to rotate at idle speed until direct tube fuel burned out.

Lpg Gas Forklift of supplementary fuel in two ways

1.For bottles,according to the design of forklift, gas powered forklift ,the cylinder can be removed, then the cylinder charge of liquefied gas exchange can continue to use.

2. In forklift truck directly aerated into the cylinder. This way is that the factory has since filling equipment for forklift to play, forklift driving up to the gas station next to, lpg forklift truck ,directly without inflation will cylinder unloading under.

Regardless of what kind of aerated should note aerated or changing the bottle, must in outdoor ventilated, safe, 2.5ton lpg forklift and in accordance with the standard for fire protection for local places of. The forklift must stop, turn off, the operator must leave the driver's seat.

Lpg Gas Forklift management

LPG forklift if the fuel is exhausted, not like the gasoline engine, so the engine flameout, lpg forklift truck ,when the liquefied gas cylinder runs out, the driver will obviously feel the power weakened, but still in the residual liquefied gas bottle with a distance, the driver should not throttle, drove to a safe place, 2.5ton lpg forklift ready to charge (Yan double fuel system, which can be switched to gasoline to drive a period of time).

Lpg Gas Forklift Truck in Hanshan zhaoguan town

In fact, the first contact and negotiate Huang Chia truck project is not Hanshan praise Zen Mountain Economic Zone Administrative Committee, but Hanshan zhaoguan town. By the end of 2014, the town party secretary zhaoguan learned Wong Jia Feng universal forklift (Jiangsu) Co., Ltd. gas powered forklift would like to rapidly expand production scale, has repeatedly in the province Shexian, feixi and Jiangsu, Zhejiang and other places to inspect the zone, universal seal immediately and discuss the town party secretary Wang Jun, Huang Jia-door invitation to Hanshan forklift company official visit.

Because zhaoguan town is a tourist town,2.5ton lpg forklift ， agricultural town, does not have launched large-scale industrial projects condition Wang Jun, seal all the people will take the initiative to recommend the project to praise Zen Mountain Economic Zone, the park has built a standardized plant allows a company responsible for the human eye bright, three "hit it off", in February 2015 signed a tripartite cooperation agreement, the project started construction in April, put into effect over the year. All projects can be realized in the future production capacity of 2,000 units,rough terrain forklift trucks ， sales of 300 million yuan, local solutions for more than 150 jobs

Zhejiang forklift brand exhibit 2014 Shanghai bauma exhibition

25-28 November 2014, two-year term of the Seventh China International Construction Machinery,lpg forklift Building Material Machines, Construction Vehicles and Equipment Expo bauma china 2014 (Shanghai Bauma) gala held at the Shanghai New International Expo Center. Shanghai BMW Exhibition is the largest and most extensive influence, exhibiting the largest domestic construction companies mechanical machines, Building Material Machines, Construction Vehicles and Equipment Expo. Bauma China,lpg forklift trucks according to official data, this exhibition will have 300,000 square meters of large exhibition space to more than 3,000 exhibitors will gather more than 40 countries around the world, the audience is expected to be over 18 million,which is the best platform for enterprises and foreign trade show. Zhejiang, a truck carrying part of the new company for the first time participated in this internationally renowned exhibition.